Degradation of polyacrylamide (PAM) and methane production by mesophilic and thermophilic anaerobic digestion: Effect of temperature and concentration

• PAM degradation in thermophilic AD in comparison with mesophilic AD. • PAM degradation and its impact on thermophilic and mesophilic AD. • Enhanced methane yield in presence of PAM during thermophilic and mesophilic AD. • PAM degradation and microbial community analysis in thermophilic and mesophilic AD. Polyacrylamide (PAM) is generally employed in wastewater treatment processes such as sludge dewatering and therefore exists in the sludge. Furthermore, it degrades slowly and can deteriorate methane yield during anaerobic digestion (AD). The impact or fate of PAM in AD under thermophilic conditions is still unclear. This study mainly focuses on PAM degradation and enhanced methane production from PAM-added sludge during 15 days of thermophilic (55°C) AD compared to mesophilic (35°C) AD. Sludge and PAM dose from 10 to 50 g/kg TSS were used. The results showed that PAM degraded by 76% to 78% with acrylamide (AM) content of 0.2 to 3.3 mg/L in thermophilic AD. However, it degraded only 27% to 30% with AM content of 0.5 to 7.2 mg/L in mesophilic AD. The methane yield was almost 230 to 238.4 mL/g VSS on the 8th day in thermophilic AD but was 115.2 to 128.6 mL/g VSS in mesophilic AD. Mechanism investigation revealed that thermophilic AD with continuous stirring not only enhanced PAM degradation but also boosted the organics release from the sludge with added PAM and gave higher methane yield than mesophilic AD.     

Environmental pollution,hydropower and nuclear energy generation before and after catastrophe: Bathtub-Weibull curve and MS-VECM methods

In this paper, the life span of hydro and nuclear energy generations and the relationship between hydro and nuclear energy generations, environmental pollution, and economic growth were investigated for Japan covering the period of 1960–2018 by employing the Bathtub-Weibull curve and Markov switching-vector error correcting (MSVEC) method, respectively. According to the Bathtub-Weibull curve analysis, a rising failure rate for nuclear energy was found, indicating that the life of nuclear energy has expired, but a decreasing failure rate for hydroelectric energy has been detected. Then two different MSVEC models were used. The MSVEC method, unlike traditional approaches, determines the relationship between variables under different regimes. The results of MSVEC methods indicate three important points. First, regime-dependent asymmetry and regime changes are crucial for policy recommendations. Second, the shocks to hydropower and nuclear energy generations cause temporary deviations from the long-run growth path in both regimes. Lastly, the increase in hydropower generation leads to a decrease in environmental pollution and an increase in GDP, and an increase in nuclear power generation increases pollution and growth in both regimes.     

移动通信技术发展对安全生产影响研究*

为了深入揭示安全生产水平同移动通信技术发展的内在联系，提出安全生产信息技术能力的概念及其监控管理连接、救援响应监测、定位导航追踪3方面子能力的定义，进而通过构建3方面子能力同移动通信主要性能指标之间的关系模型（SPITCMC），并对其进行深入分析和研究。研究结果表明:SPITCMC模型可以准确诠释过去移动通信技术发展对安全生产水平产生的影响，同时可用于预判未来移动通信技术发展对安全生产可能产生的影响程度，从而为后续相关工作的开展提供参考和借鉴。     

丙烯腈生产废水中聚合物的资源化利用

以丙烯腈生产废水中的丙烯腈低聚物为原料制备聚丙烯酰胺。通过正交实验考察了水解反应条件和交联反应条件对反应的影响。FTIR表征结果显示,丙烯腈低聚物中的氰基已完全水解为酰胺基,产物聚丙烯酰胺中含有酰胺基和羧基。实验结果表明,在自来水加入量100 m L、水解反应温度95℃、m(Na OH)∶m(丙烯腈低聚物)=2.0、水解反应时间3 h的最佳水解反应条件,交联反应温度60℃、质量分数37%~40%的甲醛加入量6 m L、交联反应时间2 h的最佳交联反应条件下,处理20 g丙烯腈低聚物,可得到产物聚丙烯酰胺14.50 g,聚丙烯酰胺的水解度为21.1%、相对分子质量为2.7×106。产品性能满足Q/SH 0046—2007《钻井液用聚丙烯酰胺技术要求》中部分水解聚丙烯酰胺的性能要求。     

Effects of land use,cover, and protection on stream and riparian ecosystem services and biodiversity

Protected areas are an important part of broader landscapes that are often used to preserve biodiversity or natural features. Some argue that protected areas may also help ensure provision of ecosystem services. However, the effect of protection on ecosystem services and whether protection affects the provision of ecosystem services is known only for a few services in a few types of landscapes. We sought to fill this gap by investigating the effect of watershed protection status and land use and land cover on biodiversity and the provision of ecosystem services. We compared the ecosystem services provided in and around streams in 4 watershed types: International Union for Conservation of Nature category II protected forests, unprotected forests, unprotected forests with recent timber harvesting, and unprotected areas with agriculture. We surveyed 28 streams distributed across these watershed types in Quebec, Canada, to quantify provisioning of clean water, carbon storage, recreation, wild foods, habitat quality, and terrestrial and aquatic biodiversity richness and abundance. The quantity and quality of ecosystem services and biodiversity were generally higher in sites with intact forest—whether protected or not—relative to those embedded in production landscapes with forestry or agriculture. Clean-water provision, carbon storage, habitat quality, and tree diversity were significantly higher in and around streams surrounded by forest. Recreation, wild foods, and aquatic biodiversity did not vary among watershed types. Although some services can be provided by both protected and unprotected areas, protection status may help secure the continued supply of services sensitive to changes in land use or land cover. Our findings provide needed information about the ecosystem service and biodiversity trade-offs and synergies that result from developing a watershed or from protecting it.     

区块链技术在安全生产信息化建设中的应用

为了促进安全生产信息化平台在数据方面进行分析以及整合,基于区块链本身的匿名性、去中心化、安全性、开放性以及独立性等优势,提出将区块链技术应用于安全生产信息化建设,研究表明,区块链技术的应用将能够为企业针对生产安全状态进行有效监督提供最大的帮助,最大限度的实现资源共享,为企业监督、政府部门监管提供便利条件,各企业之间就安全问题进行交流沟通,安全评价服务机构针对各企业安全生产存在的问题提供更有针对性的服务,同时对于提升服务效率以及服务质量有着重要现实意义。     

城镇生活污水厂实行清洁生产途径分析

结合企业清洁生产理论,根据污水处理厂实际情况,从“节能、降耗、减排、增效”出发,详细阐述了污水厂实行清洁生产的途径。指出节约电能、新鲜水、药剂,减少污染物排放是污水处理厂清洁生产的主要出发点。并进行实例分析。     

目标分解法在清洁生产中的应用

间苯二甲酸装置扩产改造后排污量增加较多,翻倍的排污量严重影响到装置发展,针对装置的排污问题,利用目标分解法查找关键原因并进行技术改造,改造后装置排污量大大减少,提高了装置的竞争力。     

生产安全事故责任认定定量化方法的探讨

当前,我国生产安全事故的责任认定是在事故调查组分析调查事故原因后,对事故责任者承担的责任进行定性的责任认定,受一定的主观因素影响。为了避免主观因素的影响,本文提出了一种责任认定定量化方法,该方法首先从安全管理、安全技术和职业健康卫生三方面建立了完善的事故影响因素集;然后在分析事故原因后采用专家打分法(德尔菲法)确定各影响因素的影响度,并计算出与事故相关的责任者的累加影响度,即责任大小;最后根据事故造成的人员伤亡和经济损失情况对事故责任者作出处理。此方法对生产安全事故责任认定更加公正客观。     

基于专利地图的我国金属表面无铬钝化清洁生产技术分析

本文以专利地图为分析工具,对我国金属表面无铬钝化清洁生产技术发展的时间、空间和内容进行了归纳分析,并通过研究我国金属表面无铬钝化清洁生产技术专利的发展现状,对其今后的发展趋势进行了预测。